Please use this identifier to cite or link to this item: doi:10.22028/D291-40119
Volltext verfügbar? / Dokumentlieferung
Files for this record:
There are no files associated with this item.
Title: Plasticity induced by nanoindentation in a CrCoNi medium-entropy alloy studied by accurate electron channeling contrast imaging revealing dislocation-low angle grain boundary interactions
Author(s): Habiyaremye, Frederic
Guitton, Antoine
Schäfer, Florian UdsID
Scholz, Felicitas
Schneider, Mike
Frenzel, Jan
Laplanche, Guillaume
Maloufi, Nabila
Language: English
In:
Title: Materials Science and Engineering: A
Volume: 817
Publisher/Platform: Elsevier
Year of Publication: 2021
DDC notations: 500 Science
Publikation type: Journal Article
Abstract: In the present work, interactions of nanoindentation-induced dislocations (NIDs) with a low-angle grain boundary (LAGB) are investigated in a single-crystalline CrCoNi medium-entropy alloy (MEA). Microstructural evolutions before and after nanoindentation were examined using accurate electron channeling contrast imaging (A-ECCI). In the as-grown state, the alloy microstructure consists of subgrains separated by LAGBs. After nanoindentation on the (001) plane far away from LAGBs, the load-displacement curves exhibit the typical behavior of metals and alloys with a pop-in marking the elastic-plastic transition. This pop-in is related to the nucleation of NIDs that are observed to form pile-ups on {111} planes. In contrast, when indents are performed in the vicinity of a LAGB with a low misorientation angle of 0.24° and consisting of dislocations spaced ~60 nm apart, different micromechanical responses and deformation mechanisms are observed depending on the distance between the LAGB and the nanoindenter tip. When the distance between the LAGB and the nanoindenter tip is larger than four times the size of the indent (corresponding ratio: R > 4), the LAGB does not affect the micromechanical response nor interact with NIDs. In contrast, when the indenter comes in direct or indirect contact with the LAGB (R < 1), the load-displacement curve deviates at low loads from the elastic stage, and pop-ins are not observed. In this case, the continuous deformation is accommodated by the movement of the pre-existing LAGB dislocations. For intermediate cases with 1 < R < 4, the load of the initial pop-in is dependent on the local defect density. In this latter case, the pile-ups of NIDs directly impinge on the LAGB. Microstructural analyses reveal that the LAGB accommodates plasticity by blocking the NIDs, activating a dislocation nucleation site in the adjacent subgrain/emission of dislocation from the LAGB, and inducing slight motions of its constituent dislocations.
DOI of the first publication: 10.1016/j.msea.2021.141364
URL of the first publication: https://www.sciencedirect.com/science/article/abs/pii/S092150932100633X
Link to this record: urn:nbn:de:bsz:291--ds-401193
hdl:20.500.11880/36110
http://dx.doi.org/10.22028/D291-40119
ISSN: 0921-5093
Date of registration: 14-Jul-2023
Faculty: NT - Naturwissenschaftlich- Technische Fakultät
Department: NT - Materialwissenschaft und Werkstofftechnik
Professorship: NT - Prof. Dr. Christian Motz
Collections:SciDok - Der Wissenschaftsserver der Universität des Saarlandes



Items in SciDok are protected by copyright, with all rights reserved, unless otherwise indicated.