Bitte benutzen Sie diese Referenz, um auf diese Ressource zu verweisen:
doi:10.22028/D291-32155
Titel: | Acquiring in situ Fatigue Crack Growth Curves by a Compliance Method for Micro Bending Beams to Reveal the Interaction of Fatigue Cracks with Grain Boundaries |
VerfasserIn: | Gruenewald, Patrick Rauber, Jonas Marx, Michael Motz, Christian Schäfer, Florian |
Sprache: | Englisch |
Titel: | Procedia Structural Integrity |
Seiten: | 13-20 |
Verlag/Plattform: | Elsevier |
Erscheinungsjahr: | 2019 |
Titel der Konferenz: | ICSI 2019 The 3rd International Conference on Structural Integrity |
Freie Schlagwörter: | small fatigue cracks dislocation grain boundary interaction micro bending beam compliance method micro specimen |
DDC-Sachgruppe: | 500 Naturwissenschaften 530 Physik 540 Chemie 620 Ingenieurwissenschaften und Maschinenbau 621.3 Elektrotechnik, Elektronik |
Dokumenttyp: | Konferenzbeitrag (in einem Konferenzband / InProceedings erschienener Beitrag) |
Abstract: | To understand the interaction of dislocations with microstructural obstacles it is necessary to find test methods which are able to resolve the interaction of only a single or few defects with obstacles like interfaces. Therefore, the investigation of micro specimens has been established over the years as a suitable method to test the influence of microstructural features on the mechanical response. While quasi-static loading of micro specimens has been carried out extensively in the past decade and has given powerful insights on the mechanical behavior at small scales, cyclic loading and fatigue crack growth experiments still provide a challenge. In order to check the possibility to systematically initiate and monitor fatigue crack growth rates in micro specimens, we cyclically loaded micro bending beams made of a nickelbase superalloy. Furthermore, for grain boundaries of differing types we checked if the crack growth curves are suitable to measure crack - microstructure interactions. The fatigue cracks showed a deceleration when approaching the grain boundaries followed by an abrupt re-acceleration, which is in accordance to macroscopic experiments and connected to dislocation or slip transfer from the plastic zone of the crack through the grain boundary. Furthermore, we observed a dependency of the deceleration on the grain boundary type and the crystallographic orientation of the neighboring grains. A 3D-HR-orientation gradient map was gathered by HR-EBSD using the software CrossCourt in combination with a self-provided MATLAB tool to reveal detailed information about strain localization at the grain boundary in the process zone near the crack tip. |
DOI der Erstveröffentlichung: | 10.1016/j.prostr.2019.08.003 |
Link zu diesem Datensatz: | urn:nbn:de:bsz:291--ds-321553 hdl:20.500.11880/29670 http://dx.doi.org/10.22028/D291-32155 |
Datum des Eintrags: | 14-Sep-2020 |
Bemerkung/Hinweis: | Procedia Structural Integrity, 17 (2019), S. 13-20 |
Fakultät: | NT - Naturwissenschaftlich- Technische Fakultät |
Fachrichtung: | NT - Materialwissenschaft und Werkstofftechnik |
Professur: | NT - Prof. Dr. Christian Motz |
Sammlung: | SciDok - Der Wissenschaftsserver der Universität des Saarlandes |
Dateien zu diesem Datensatz:
Datei | Beschreibung | Größe | Format | |
---|---|---|---|---|
1-s2.0-S2452321619302070-main.pdf. | Acquiring in situ Fatigue Crack Growth Curves by a Compliance Method for Micro Bending Beams to Reveal the Interaction of Fatigue Cracks with Grain Boundaries | 781,35 kB | Adobe PDF | Öffnen/Anzeigen |
Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons