Please use this identifier to cite or link to this item: doi:10.22028/D291-24643
Title: Interference coatings on glass based on photopolymerizable nanomer material
Author(s): Mennig, Martin
Oliveira, Peter William de
Schmidt, Helmut K.
Language: English
Year of Publication: 1999
OPUS Source: Thin solid films. - 351. 1999, 1/2, S. 99-102
SWD key words: Photopolymerisation
Interferenz <Physik>
Querempfindlichkeit
Glas
Sol-Gel-Verfahren
Mehrschichtsystem
DDC notations: 620 Engineering and machine engineering
Publikation type: Journal Article
Abstract: A new sol-gel method for the preparation of optical SiO2 and TiO2 multilayer coatings has been developed. As an example, a 3-layer antireflective (AR-filter) coating and a 5-layer NIR reflective coating on glass are described. For the preparation, a nanoparticulate TiO2 sol was synthesized by hydrolysis and condensation of tetraisopropylorthotitanate and complex formation with methacrylic acid. A SiO2 nanoparticulate sol was synthesized analogeously with tetraethoxysilane (TEOS) as the precursor. By mixing both sols in different ratios, layers with tunable refractive index between 1.46 and 2.2 could be obtained on glass after thermal densification at 450 degrees C for 15 min. Three layers (SiO2-TiO2, TiO2, SiO2) were deposited by dip-coating with subsequent UV-curing, and the layer-stack was thermally densified at 450 C. The so obtained AR-filter shows a reflection of less than or equal to 2% in the wavelength range between 380 and 610 nm, less than or equal to 1% between 450 and 560 nm and 0% at 550 nm. The AR filter shows very good abrasion resistance and scratch hardness, since only 3% haze is obtained after 1000 cycles of Taber test and the AR filter does not show any damage after 300 cycles of rubber test. The high abrasion resistance can be attributed to the surprisingly low surface roughness (about 6 nm) of the filter. The mechanical and optical properties of the AR filter did not change after sun test with 760 W/m(2) for 320 h and after boiling water test for 11 days.
Link to this record: urn:nbn:de:bsz:291-scidok-29588
hdl:20.500.11880/24699
http://dx.doi.org/10.22028/D291-24643
Date of registration: 1-Sep-2010
Faculty: SE - Sonstige Einrichtungen
Department: SE - INM Leibniz-Institut für Neue Materialien
Collections:INM
SciDok - Der Wissenschaftsserver der Universität des Saarlandes

Files for this record:
File Description SizeFormat 
sm199934.pdf197,03 kBAdobe PDFView/Open


Items in SciDok are protected by copyright, with all rights reserved, unless otherwise indicated.