Please use this identifier to cite or link to this item:
doi:10.22028/D291-22385
Title: | Grundlagen und Anwendungen der aktiven Thermographie mit elektromagnetischer Anregung : Induktions- und Konduktionsthermographie |
Other Titles: | Fundamentals and uses of active thermography with electromagnetic excitation : induction and conduction thermography |
Author(s): | Vrana, Johannes |
Language: | German |
Year of Publication: | 2008 |
SWD key words: | Thermographie Infrarotthermographie Zerstörungsfreie Werkstoffprüfung Elektromagnetische Induktion Finite-Elemente-Methode Wirbelstrom |
Free key words: | Induktionsthermographie Konduktionsthermographie Rissdetektion ZfP Stromdichte induction conduction thermography crack detection NDT |
DDC notations: | 620 Engineering and machine engineering |
Publikation type: | Dissertation |
Abstract: | Mit den in dieser Arbeit behandelten aktiven Thermographiemethoden mit elektromagnetischer Anregung können Materialfehler zerstörungsfrei, zuverlässig, schnell und bildgebend mittels Infrarotkameras nachgewiesen werden. Dabei wird bei der berührungslosen Induktionsthermographie Strom über eine Spule und bei der Konduktionsthermographie über eine galvanische Kontaktierung eingekoppelt.
Für ein tieferes Verständnis des Fehlernachweismechanismus ist ein grundlegendes Wissen über die Anregung, insbesondere über die lokale Stromdichte und -richtung, nötig. Daraus lässt sich ableiten, wie viel Wärme lokal entsteht, wie diese im Körper diffundiert und welche Temperaturverteilung sich dynamisch an der Oberfläche ergibt. Dabei erhöhen Defekte zum einen lokal die Stromdichte und stören zum anderen die Wärmediffusion. Der Detektionsprozess hängt dabei jeweils von der Defektgeometrie, -orientierung und vom -typ ab.
Es wird systematisch dargestellt, wie sich die Stromdichte- und Temperaturverteilungen in einem Körper analytisch berechnen bzw. simulieren lassen, wie verschiedene Defekttypen die Stromdichteverteilung bzw. die Temperaturausbreitung verändern und sich deshalb unterscheiden lassen. Mit diesen Modellen lässt sich schließlich eine Aussage über die Detektierbarkeit von realen Rissen treffen. Aufbauend auf dieses Wissen wird anhand zweier während dieser Arbeit bei Siemens entwickelter Systeme gezeigt, wie ein System ausgelegt werden sollte, mit welchen Auswertealgorithmen das Ergebnisbild verbessert werden kann und wie ein Anwender vorgehen sollte, um eine Komponente zu testen. Active thermography with electromagnetic excitation allows one to detect defects in components non-destructively, reliably and fast by imaging with an infrared camera. In induction thermography a current is contactlessly coupled into the component to be tested by a coil and in conduction thermography by galvanic contacts. In this thesis both techniques are discussed in detail. For a deeper understanding of the detection mechanism a fundamental knowledge of the excitation, especially of the current density and its direction, is necessary. Based on this knowledge, it can be deduced how much heat is produced locally, how the heat diffuses in the component, and which dynamic temperature distribution arises on its surface. Cracks locally increase the current density and they disturb the heat diffusion. The detection mechanism of defects and the detection limit depends on its type, geometry, and orientation. In a systematic way, this thesis presents analytical calculations and simulations of the distributions of current density and temperature in the component under test taking into account the disturbance of these distributions by different kinds of defects. Furthermore, it is discussed how these defects can be differentiated enabling one to predict their detectability. Based on this knowledge it is shown on the basis of two systems developed at Siemens during this thesis how an active thermography testing-system should be designed including the necessary algorithms to analyze the data. Finally instructions are given how to test a component. |
Link to this record: | urn:nbn:de:bsz:291-scidok-14827 hdl:20.500.11880/22441 http://dx.doi.org/10.22028/D291-22385 |
Advisor: | Arnold, Walter |
Date of oral examination: | 29-Feb-2008 |
Date of registration: | 22-Apr-2008 |
Faculty: | NT - Naturwissenschaftlich- Technische Fakultät |
Department: | NT - Materialwissenschaft und Werkstofftechnik |
Former Department: | bis SS 2016: Fachrichtung 8.4 - Werkstoffwissenschaften |
Collections: | SciDok - Der Wissenschaftsserver der Universität des Saarlandes |
Files for this record:
File | Description | Size | Format | |
---|---|---|---|---|
20080407_Dissertation_Johannes_Vrana.pdf | 11,48 MB | Adobe PDF | View/Open |
Items in SciDok are protected by copyright, with all rights reserved, unless otherwise indicated.