Bitte benutzen Sie diese Referenz, um auf diese Ressource zu verweisen: doi:10.22028/D291-24647
Titel: UV curable hard coatings on plastics
Verfasser: Sepeur, Stefan
Kunze, Nora
Werner, B.
Schmidt, Helmut K.
Sprache: Englisch
Erscheinungsjahr: 1999
Quelle: Thin solid films. - 351. 1999, 1/2, S. 216-219
SWD-Schlagwörter: Beschichtung
DDC-Sachgruppe: 620 Ingenieurwissenschaften und Maschinenbau
Dokumentart : Journalartikel
Kurzfassung: A photochemically curable transparent hard coating material has been developed to improve the wear resistance of organic polymers. Methacrylate functionalized silanes and nanoscaled boehmite particles were used for the preparation of the UV curable hard coatings by the sol-gel technique. The inorganic network is formed as a result of the controlled hydrolysis and condensation of the methaclyloxysilanes in the presence of nanoparticles (particle size: 15 nm). The hydrolysis and condensation of the methacryloxy silane, for two hours in presence of boehmite nanoparticles (43 wt.%), at 100 degrees C leads to a degree of condensation of 80% of the inorganic network, as determined by Si-29-NMR spectroscopy. The organic network is formed by photoinitiated polymerisation of the methacrylic-functions in only a few minutes, using UV light from a Hg high pressure lamp. Transparent coatings on plastic substrates (PC, PMMA) were produced by spray coating with good optical quality and thicknesses of several micrometers. The transparent coatings show excellent adhesion on PMMA and PC (GT/TT = 0/0, DIN 53151), even without using primers, and also good abrasion resistance after the Taber abraser test with haze values of 10% after 1000 cycles (CS 10F rolls, 5,4 N, DIN 52347). The water exposition test (65 degrees C, deionized water) and the Suntest, without using filters, did not result in any crack formation, loss of adhesion or yellowing within the test period of two weeks.
Link zu diesem Datensatz: urn:nbn:de:bsz:291-scidok-29684
SciDok-Publikation: 1-Sep-2010
Fakultät: Sonstige Einrichtungen
Fachrichtung: SE - INM Leibniz-Institut für Neue Materialien
Fakultät / Institution:INM
SE - Sonstige Einrichtungen

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
sm199938.pdf258,87 kBAdobe PDFÖffnen/Anzeigen

Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.