Please use this identifier to cite or link to this item: doi:10.22028/D291-24559
Title: Preparation, characterization and sintering behavior of barium titanate powders coated with Ba-, Ca-, Si- and Ti-containing components
Author(s): Abicht, Hans-Peter
Völtzke, Dieter
Schmidt, Helmut K.
Language: English
Year of Publication: 1997
OPUS Source: Materials chemistry and physics. - 51. 1997 1, S. 35-41
SWD key words: Barium
DDC notations: 620 Engineering and machine engineering
Publikation type: Journal Article
Abstract: An emulsion technique and spray drying were used to prepare BaTiO3 powders coated with additives. Different additive compositions (TiO2; TiO2/SiO2; CaO/TiO2/SiO2; 2BaO/TiO2/2SiO2) were used in the form of their aqueous precursor solutions. The as-received powders were compared with powders of the same composition manufactured by conventional wet-milling. The coating of the BaTiO3 powder positively influences the sintering behavior. Isothermal dilatometric measurements show that the activation energy &Delta;E of the shrinkage of the coated powders is lower than that of the powders prepared by milling. This is caused by the homogeneous distribution of the additive. The activation energy for the different additives changes in the following sequence: &Delta;E(2BaO/TiO2/2SiO2) < &Delta;E(TiO2) < &Delta;E(CaO/TiO2/SiO2) < &Delta;E(TiO2/SiO2). This sequence correlates with the amount of Ba ions necessary to diffuse out of the BaTiO3 matrix to form the secondary phases Ba2TiSi2O8 or Ba6Ti17O40, respectively.
Link to this record: urn:nbn:de:bsz:291-scidok-28668
Date of registration: 14-May-2010
Faculty: SE - Sonstige Einrichtungen
Department: SE - INM Leibniz-Institut für Neue Materialien
SciDok - Der Wissenschaftsserver der Universität des Saarlandes

Files for this record:
File Description SizeFormat 
sm199736.pdf683,5 kBAdobe PDFView/Open

Items in SciDok are protected by copyright, with all rights reserved, unless otherwise indicated.