Please use this identifier to cite or link to this item:
|Title:||Colloidal processing of temperature shock resistant SiC with tailored porosity|
Schmidt, Helmut K.
|Year of Publication:||1996|
|OPUS Source:||Microporous and macroporous materials : symposium held April 8 - 11, 1996, San Francisco, California, U.S.A. / ed.: Raul F. Lobo ... - Pittsburgh, Pennsylvania : MRS, 1996. — (Materials Research Society symposia proceedings ; 431), S. 455-460|
|SWD key words:||Temperatur|
|DDC notations:||620 Engineering and machine engineering|
|Publikation type:||Conference Paper|
|Abstract:||From aqueous slurries containing SiC powder coated with nano-scaled carbon black, green bodies were prepared by slip casting. On slip cast green bodies the densification , microstrucural development and mechanical properties were investigated. Depending on the sintering temperature and boron carbide content samples with different relative densities between 0.90 and 0.988 were obtained after pressureless sintering. In all samples a homogeneous microstructure (distribution of the residual pores and grain morphology) was observed. Due to this homogeneity the sintered samples showed high amount of fracture strength of about 500 MPa, even at large residual porosities of 10%. The thermal shock resistance of samples with different porosities measured by water quenching revelaed the critical temperature difference to be around 700 K.|
|Link to this record:||urn:nbn:de:bsz:291-scidok-28160|
|Date of registration:||1-Apr-2010|
|Faculty:||SE - Sonstige Einrichtungen|
|Department:||SE - INM Leibniz-Institut für Neue Materialien|
SciDok - Der Wissenschaftsserver der Universität des Saarlandes
Items in SciDok are protected by copyright, with all rights reserved, unless otherwise indicated.