Please use this identifier to cite or link to this item:
|Title:||Corrosion resistant sol-gel ZrO2 coatings on stainless steel|
Aegerter, Michel A.
|Year of Publication:||1992|
|OPUS Source:||Journal of non-crystalline solids. - 147/148. 1992, S. 813-819|
|SWD key words:||Korrosion|
|DDC notations:||620 Engineering and machine engineering|
|Publikation type:||Journal Article|
|Abstract:||Corrosion resistant ZrO2 coatings on 316L stainless steel sheets have been fabricated utilizing sonocatalysis of precursors sols. The solutions were prepared from zirconium alkoxide Zr(OC3H7)4, isopropanol alcohol, glacial acetic acid and water, and submitted to ultrasonic agitation. Their composition varied between 0.025 and 0.9 mol/l ZrO2. Single thin films were thermally treated between 40 and 1100°C in unoxidizing atmosphere. The coatings characteristics were determined by X-ray diffraction, optical reflection, ellipsometry and scanning electron microscopy. At temperatures higher than 700°C, the films are polycrystalline with a tetragonal structure and show a blue-green color. Depending on the composition, the thickness varied from 5.5 to 35 nm. When treated under a slow and controlled heating rate, the ZrO2 films with the smallest thickness show outstanding corrosion resistance to acid attack and to oxidation as no weight change was observed after 30 h treatment in H2SO4 at 81°C or 10 h treatment in air at 800°C. The thicker films as well as the films treated with a rapid heating rate tend to crack during the densification process and are less corrosion resistant. © 1992 Elsevier Science Publishers B.V. All rights reserved.|
|Link to this record:||urn:nbn:de:bsz:291-scidok-21811|
|Date of registration:||2-Jul-2009|
|Faculty:||SE - Sonstige Einrichtungen|
|Department:||SE - INM Leibniz-Institut für Neue Materialien|
SciDok - Der Wissenschaftsserver der Universität des Saarlandes
Items in SciDok are protected by copyright, with all rights reserved, unless otherwise indicated.